Step 4 Digital Transmitter Connection [Pt865] Step 5 Ac Mains Lead Connection - Panasonic SC-PT560 Operating Instructions Manual

4
step
Digital transmitter connection
Back of the main unit
5
step
AC mains lead connection
[Southeast]Asia,[Thailand,[The[Middle[East,[South[Africa,]
[Saudi[Arabia[and[Kuwait]
Before connecting the AC mains lead
Set the voltage.
VOLT ADJ
110 127V
[Saudi[Arabia[and[Kuwait]
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
Conserving power
The main unit consumes a small amount of power, even when it is in
standby mode (approx. 0.4 W). To save power when the unit is not to be
used for a long time, unplug it from the household AC mains socket.
You will need to reset some memory items after plugging in the main
unit.
12
DIGITAL
TRANSMITTER
Use a flat-head screwdriver to move
the voltage selector to the appropriate
position for the area in which this
220 240V
system is used.
[PT865]
Digital transmitter
Insert fully until you hear a click.
Do not insert or remove
while the main unit is on.
[PT565] [PT560]
PUSH
Push!
PUSH
You can use the blunt end of a writing instrument
to push here until the cover pops out.
≥ Remove the digital transmitter cover before installing any optional
Panasonic wireless accessory.
≥ Replace the cover when the digital transmitter is not in use.
Main unit
AC IN
AC mains lead
(included)
[Note]
The included AC mains lead is for use with the main unit only. Do not use
it with other equipment. Also, do not use cords for other equipment with
the main unit.
Digital transmitter
PUSH
cover
Push!
DIGITAL
PUSH
TRANSMITTER
To household mains socket