Radio And Ac Mains Lead Connections - Panasonic SC-HT540 Operating Instructions Manual

5

Radio and AC mains lead connections

STEP
AM loop antenna
≥ Connect the AC mains lead after all other connections are complete.
≥ Using an outdoor antenna (optional) (➜ page 33).
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other wires
and cables.
AC mains lead
Conserving power
The main unit consumes a small amount of power, even when it is turned off (approx. 0.5 W). To save power when
the unit is not to be used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the unit.
[Note]
The included AC mains lead is for use with this unit only. Do not use it with other equipment. Also, do not use cords
for other equipment with this unit.
FM indoor antenna
Click!
While pushing, insert the wire fully.
White
Red
Black
To household mains socket
(AC 230–240 V, 50 Hz)
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
FM indoor antenna
Affix this end of the antenna where
reception is best.
Adhesive tape
Loosen the terminal
screw with a Phillips-
head screwdriver.
AC mains lead
Main unit
Re-tighten
the terminal
screw.
13