Table of Contents
Advertisement
TECHNICAL SERVICE MANUAL
Prestigio Nobile 150
9. Remove the four screws to remove the LCD bracket on side of the LCD panel. (Figure 2-26)
Figure 2-26 Remove the LCD bracket
Figure 2-27 Remove the LCD wire
10. Disconnect the wire from bottom of the LCD panel. (Figure 2-27)
Reassembly
1. Reconnect the wire to the LCD panel.
2. Attach the LCD bracket on the LCD panel and secure with four screws.
3. Fit the LCD panel back into place and secure with six screws, and reconnect the cable to the inverter board.
4. Fit the LCD cover back into the LCD housing. Tighten two screws to secure the LCD cover attach the rubber pads.
5. Replace the LCD assembly and battery pack. (See section 2.2.1and 2.2.7 reassembly.)
70
Advertisement
Table of Contents
