Table of Contents
Advertisement
Prestigio Nobile 150
1.1.2.5 TV Encoder : CH7011A
The CH7011 is a Display controller device which accepts a digital graphics input signal, and encodes and
transmits data to a TV output (analog composite, s-video or RGB). The device accepts data over one 12-bit wide
variable voltage data port which supports five different data formats including RGB and YCrCb.The TV-Out
processor will perform non-interlace to interlace conversion with scaling and flicker filters, and encode the data
into any of the NTSC or PAL video standards. The scaling and flicker filter is adaptive and programmable to
System timer, refresh request, speaker tone output Power Management Logic
ACPI 2.0 compliant
ACPI-defined power states (C1–C2, S3–S5 )
Supports Desktop S1 state (like C2 state, only STPCLK# active)
ACPI power management timer
PCI PME# support
SMI# generation
All registers readable/restorable for proper resume from 0V suspend states External Glue Integration
Integrated pull-up, pull-down and series termination resistors on IDE, processor interface
Integrated Pull-down and Series resistors on USB Enhanced Hub Interface Buffers Improve Routing
flexibility (Not available with all Memory Controller Hubs)
23
TECHNICAL SERVICE MANUAL
Advertisement
Table of Contents
