Prestigio Nobile 150
2.2.6 DDR-SDRAM
Disassembly
1. Carefully put the notebook upside down. And remove the battery pack. (Refer to section 2.2.1 disassembly)
2. Loosen one screw that secure the DDR compartment cover. (Figure 2-13)
3. Pull the retaining clips outwards ( ) and remove the DDR-SDRAM ( ). (Figure 2-14)
Reassembly
1. To install the DDR, match the DDR's notched part with the socket's projected part and firmly insert the DDR into
the socket at 20-degree angle. Then push down until the retaining clips lock the DDR into position.
2. Tighten one screws to secure the DDR compartment cover to housing.
3. Replace the battery pack. (Refer to section 2.2.1 reassembly)
Figure 2-13 Remove the cover
Figure 2-14 Remove the DDR-SDRAM
63
TECHNICAL SERVICE MANUAL