Hardware Engineering Specification; Introduction - Prestigio NOBILE 150 Technical & Service Manual

TECHNICAL SERVICE MANUAL Prestigio Nobile 150

1. Hardware Engineering Specification

1.1 Introduction

1.1.1 General Description
This document describes the brief introduction for Prestigio Nobile 150 portable notebook computer system.
1.1.2 System Overview
The Nobile 150 model is designed for Intel Banias processor with 400MHz FSB with Micro-FCPGA package. It
can support Banias 1.3GHz ~ 1.7GHz. ,Dothan 1.7GHz ~ 1.9GHz, and Banias Celeron 1.2GHz ~ 1.4GHz.
This system is based on PCI architecture and is fully compatible with IBM PC/AT specification, which has standard
hardware peripheral interface. The power management complies with Advanced Configuration and Power Interface
(ACPI) 2.0. It also provides easy configuration through CMOS setup, which is built in system BIOS software and can
be pop-up by pressing F2 key at system start up or warm reset. System also provides icon LEDs to display system
status, such as AC Power indicator, Battery Power indicator, Battery status indicator, CD-ROM, HDD, NUM LOCK,
CAP LOCK, and SCROLL LOCK. It also equipped with LAN, 56K Fax MODEM, 4 USB port, 3D stereo audio
functions, S-Video and audio line out, and internal microphone.
The memory subsystem supports two expansion DDR SDRAM slot with unbuffered PC2100/PC2700 DDR-SDRAM
4