Assembly; Bolt 3/8"X64Mm; Cap Nut 3/8"X17T - Exerpeutic Pro Stride 23 Owner's Manual

1. Front Stabilizer Installation
For easier installation of the Front Stabilizer (9), place a block of wood under the
main body.
Position the Front Stabilizer (9) in front of Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (9) onto the front curve of the Main Frame (1) with two
3/8"x64mm Bolts (35), four 3/8"x20x2.0T Washers (36), and two 3/8"x17T Cap
Nuts (37). Tighten bolts with the Hex Tool with Phillips Screwdriver provided.
Tool:
Hex Tool with Phillips
Screwdriver (14mm)
Hardware:

(35) Bolt 3/8"x64mm

2 PCS

ASSEMBLY

37
36
9
36
35
(36) Washer 3/8"x20x2.0T
4 PCS
10
1
Block of Wood

(37) Cap Nut 3/8"x17T

2 PCS