Qlogic SANbox 6142 User Manual page 85

Q
System Description: text that describes the location of the router.
❑
Read Community: a password that authorizes an SNMP management server
❑
to read information from the router. This is a write-only field. The value on the
router and the SNMP management server must be the same. The read
community password can be up to 32 characters excluding #, semicolon (;),
and comma (,). The default is public.
Trap Community: a password that authorizes an SNMP management server
❑
to receive traps. This is a write-only field. The value on the router and the
SNMP management server must be the same. The trap community password
can be up to 32 characters excluding the number sign (#), semicolon (;), and
comma (,). The default is public.
System Location: specifies the name of the router location. The name can
❑
be up to 64 characters excluding the number sign (#), semicolon (;), and
comma (,).
System Contact: specifies the name of the person to be contacted to respond
❑
to trap events. The name can be up to 64 characters excluding the number
sign (#), semicolon (;), and comma (,).
Authentication Traps: Enables or disables the generation of authentication
❑
traps in response to authentication failures.
SNMP Trap Receivers
■
Enabled: a checkbox to enable the trap receiver specified by the IP address,
❑
trap port, and trap version.
IP Address: the IP address to which the SNMP traps are sent. A maximum
❑
of eight trap addresses are supported.
Trap Port: the port number on which the trap is sent. The default is 162.
❑
Trap Version: specifies the SNMP version (1 or 2) with which to format traps.
❑
FI0054601-00 A
7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-15