Qlogic SANbox 6142 User Manual page 113

Q
Map Local Initiator/Target Wizard: launches the Map Local wizard, which
■
allows you to map a local initiator to a local target. For more information, see
section
Unmap Local Initiator/Target Wizard: launches the Unmap Local wizard, which
■
allows you to delete a local initiator to a local-target mapping. For more
information, see
Add Remote Router Wizard: launches the Add Remote Router wizard, which
■
allows you to assign a remote router to your local router as a peer. For more
information, see
Remove Remote Router Wizard: launches the Remove Remote Router wizard,
■
which allows you to remove a local-to-remote router peer assignment. For more
information, see
Map Remote Initiator/Target Wizard: launches the Map Remote wizard, which
■
allows you to map an initiator to a target device one of which is on a remoter
router. For more information, see
Unmap Remote Initiator/Target Wizard: launches the Unmap Remote wizard,
■
which allows you to delete an initiator-to-target device mapping. For more
information, see
Discover iSCSI Target: launches the Discover iSCSI Target wizard, which
■
allows you to specify the IP address of the iSCSI Target to be discovered. The
target is added to the discovered targets list.
FCIP Route Add: launches the FCIP Route Add wizard, which allows you to
■
select the resources used for the route: the IP address of the remote FCIP peer,
IP parameters, VLAN support, compression and bandwidth limit.
section
FCIP Route Remove: launches the FCIP Route Remove wizard, which allows
■
you to remove an existing FCIP Route, freeing the resources (FC and GE ports)
used by the route.
FI0054601-00 A
7.6.4.
section 7.6.5.
section 7.6.6.
section 7.6.7.
section 7.6.9.
7.6.11.
See section
7 – SANsurfer iSCSI/FC Router Manager
section 7.6.8.
See section
7.6.12.
Wizards
7.6.10.
See
7-43