Qlogic SANbox 6142 User Manual page 204

A – Command Reference
Remote Map Command
Example with SMART-WRITE licenses
QRouter (admin) #> remotemap add
The following wizard will create a mapping a device connected to the
local system and a device connected to the selected remote peer system.
If you wish to terminate this wizard before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index
-----
0
Please select a REMOTE system from the list above ('q' to quit) :
Index
-----
0
1
Please select a LOCAL device from the list above ('q' to quit)
Index
-----
0
1
2
3
4
5
6
7
8
9
10
Please select a REMOTE device from the list above ('q' to quit) :
Smart-Write (0=Enable, 1=Disable)
Smart-Write Compression (0=Enable, 1=Disable)
Smart-Write Load Balance (0=Enable, 1=Disable)
All attribute values for that have been changed will now be saved.
A-32
(System Info, Mgmt IP Address)
------------------------------
iSR-6142.0608A00471(172.17.137.143)
(WWNN,WWPN/iSCSI Name)
----------------------
20:01:00:e0:8b:28:5f:3d,21:01:00:e0:8b:28:5f:3d (Initiator)
20:00:00:e0:8b:08:5f:3d,21:00:00:e0:8b:08:5f:3d (Initiator)
(WWNN,WWPN/iSCSI Name)
----------------------
20:00:00:14:c3:3d:d2:bf,22:00:00:14:c3:3d:d2:bf (Target)
20:00:00:14:c3:44:9b:86,22:00:00:14:c3:44:9b:86 (Target)
20:00:00:14:c3:44:9b:9d,22:00:00:14:c3:44:9b:9d (Target)
20:00:00:14:c3:44:9a:fa,22:00:00:14:c3:44:9a:fa (Target)
20:00:00:20:37:fd:9c:f7,22:00:00:20:37:fd:9c:f7 (Target)
20:00:00:20:37:fd:8a:b0,22:00:00:20:37:fd:8a:b0 (Target)
20:00:00:14:c3:3d:cf:80,22:00:00:14:c3:3d:cf:80 (Target)
20:00:00:14:c3:44:9a:f1,22:00:00:14:c3:44:9a:f1 (Target)
20:00:00:14:c3:44:9b:0b,22:00:00:14:c3:44:9b:0b (Target)
20:00:00:14:c3:44:9b:7c,22:00:00:14:c3:44:9b:7c (Target)
20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b:ab (Target)
Q
0
: 0
0
[Enabled ]
[Disabled ]
[Disabled ]
FI0054601-00 A