Qlogic SANbox 6142 User Manual page 184

A – Command Reference
FcipRoute Command
Examples
The following is an example of the FCIP route remove command:
QRouter (admin) #> fciproute rm
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both GE ports.
Route
-----
1
2
Please select a FCIP route from the list above ('q' to quit): 1
FCIP Route 1 has been removed from the system.
A-12
FC Port ID GE Port ID
---------- ----------
FC2 GE2
FC1 GE1
Q
FI0054601-00 A