Qlogic SANbox 6142 User Manual page 209

Q
Examples
The following is an example of the Remotepeer add command:
QRouter (admin) #> remotepeer add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
REMOTE MGMT port IP Address
Contacting REMOTE system (timeout=120 seconds) ...
<Admin> password of REMOTE system:
<Admin> password confirmed.
Remote System Information
-------------------------
Product Name
Symbolic Name
Serial Number
HW Version
SW Version
No. of iSCSI Ports
iSCSI Base Name
Mgmt IP Address
iSCSI Port 1 IP Address
iSCSI Port 1 TCP Port No.
iSCSI Port 2 IP Address
iSCSI Port 2 TCP Port No.
Do you wish to create a connection with the REMOTE system (y/n):
All attribute values for that have been changed will now be saved.
FI0054601-00 A
[0.0.0.0]
******
iSR-6142
0608A00471
3
2.3.0.1
2
iqn.2004-08.com.qlogic:isr-6142.0608a00471
172.17.137.143
10.3.5.106
3260
10.3.5.107
3260
A – Command Reference
Remote Peer Command
172.17.137.143
y
A-37