Qlogic SANbox 6142 User Manual page 270

B – Log Messages
Informational Log Messages
152070
152071
290
291
337
338
339
340
341
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
517
518
519
B-6
Table B-4. User Modules—Informational Log Messages
qapisetfcipparams_1_svc: FCIPROUTE %d Modified
qapisetfcipparams_1_svc: FCIPROUTE %d Removed
Performed router firmware upgrade, new version number is d.d.d.d
User performed a router reboot or shutdown
FC port configuration has been modified.
iSCSI port configuration has been modified.
iSNS configuration has been modified.
NTP configuration has been modified.
VLAN configuration has been modified.
Management ethernet port configuration has been modified.
Router configuration has been modified.
Remotemap added for local FC device WWPN xx.xx.xx.xx.xx.xx.xx.xx
Remotemap added for remote FC device WWPN xx.xx.xx.xx.xx.xx.xx.xx
Remotemap removed for local FC device WWPN xx.xx.xx.xx.xx.xx.xx.xx
Remotemap removed for remote FC device WWPN xx.xx.xx.xx.xx.xx.xx.xx
Localmap added for FC initiator WWPN xx.xx.xx.xx.xx.xx.xx.xx
Localmap added to FC target device WWPN xx.xx.xx.xx.xx.xx.xx.xx
Localmap removed for FC initiator
Localmap removed to FC target device
Localmap added for iSCSI initiator "iqn.dddd-dd.ttt.ttt.ttt......."
Localmap removed for iSCSI initiator "iqn.dddd-dd.ttt.ttt.ttt......."
User enabled GE port d
User disabled GE port d
User enabled FC port d
User disabled FC port d
FCIP route #d added
FCIP route #d modified
FCIP route #d removed
Q
518
519
FI0054601-00 A