Qlogic SANbox 6142 User Manual page 191

Q
Examples
The following is an example of the Initiator mod (modify) command:
QRouter
Index
-----
0
Please select an Initiator from the list above ('q' to quit):
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
All attribute values for that have been changed will now be saved.
Examples
The following is an example of the Initiator remove command:
QRouter
Index
-----
0
Please select an Initiator from the list above ('q' to quit):
All attribute values for that have been changed will now be saved.
FI0054601-00 A
(admin) #> initiator mod
(WWNN/iSCSI Name)
-----------------
iqn.1991-05.com.microsoft:qlogic-09sd5i4l
(admin) #> initiator rm
(WWNN/iSCSI Name)
-----------------
iqn.1991-05.com.microsoft:qlogic-09sd5i4l
A – Command Reference
Initiator Command
0
0
A-19