Qlogic SANbox 6142 User Manual page 83

Q
IQN
❑
the router's iSCSI name.
Hardware Version: the router's hardware version number.
❑
Software Version: the router's software version number.
❑
Operation Mode: only one mode is available, iSCSI Server Connectivity.
❑
iSCSI Port Count: the number of iSCSI ports (2).
❑
Fibre Channel Port Count: the number of Fibre Channel ports (2).
❑
Management Information
■
DHCP Option Buttons: select whether you want to define the management
❑
port IP address or have it obtained automatically through DHCP.
IP Address: the management port's IP address. When you select Use the
❑
following IP address, you can configure the IP address. When you select
Obtain an IP address automatically (DHCP), the IP address displayed is
the address obtained automatically through DHCP.
Subnet Mask: the management port's subnet mask. When you select Use
❑
the following IP address, you can configure the subnet mask. When you
select Obtain an IP address automatically (DHCP), the subnet mask
displayed is the mask obtained automatically through DHCP.
Set IP Address: this button saves any changes made to the management IP
❑
address.
MAC Address: the management port's MAC address.
❑
Link Status: the management port link status (Link UP or Link Down).
❑
NTP Server Information
■
System Time: the current date and time set on the router.
❑
NTP Server Option Buttons: disable or enable the use of NTP servers to
❑
set the router's date and time.
NTP Server 1: IP address of the first NTP server the router queries when
❑
setting its time and date.
NTP Server 2: IP address of the second NTP server the router queries when
❑
setting its time and date. This server is used only if the first NTP server did
not respond.
1. iSCSI Qualified Name
FI0054601-00 A
1
uses Symbolic Name: enable/disable the use of the symbolic name in
7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-13