Qlogic SANbox 6142 User Manual page 62

4 – Installation
Install the Firmware
6. Log on to the router as an administrator.
7. Type the following command from the router, where x stands for the firmware
image name:
8. The following message displays:
Type reboot. The following message displays:
Type y to reboot the system.
4-12
(none) login: guest
Password: password
******************************************************
*
* QLogic Router Command Line Interface (QRCLI)
*
******************************************************
QRouter#> admin start
Password : config
QRouter (admin) #>
image unpack isr-6142-2_2_0_x.bin
Unpack Completed. Please reboot the system for FW to take
affect.
Are you sure you want to reboot the System (y/n):
Q
*
*
*
FI0054601-00 A