Timer Setting - Strong SRT 7040 Manual

Region
UTC Usage
UTC Offset :
Summer Time
Date:
Time:

7.3.5.1 Timer Setting

In this menu you can setup the schedule for automatic switching to the defined channels at a particular
date/time.
Timers can be set directly from the EPG window or manually from this screen. Not set timers will be default
Off
To enter a new timer manually, select an Off marked timer in the list and press OK.
Timer Mode
Timer Service
Wakeup Channel
Wakeup Date
On Time
Duration
After all settings have been made, select Save to store the settings. Select Cancel to discard the settings.
To edit an already existing timer entry, select the entry in the list and press OK, then select and edit the item
which you wish to change.
To delete an already existing timer entry, select the entry in the list and press OK, then select and set Timer
Mode to Off and select Save to store.
Exit the screens with .
Parental Lock
Menu Lock
Channel Lock
New Password
Confirm Password
OSD Setting
OSD Timeout
Select the region or country in which you live. This will set the time offset from
UTC automatically.
Select By Region (the Region selection is valid), User Define (You may select your
UTC Offset yourself ) or Off (Time and Date setting are free to adapt.) However,
the default By Region setting and the correct Region setting are usually
sufficient. In case the Daylight Saving Time should not be delivered by the
broadcaster, you can adapt it here.
Select the correct Time Zone in which you live.
You may adapt On or Off for Daylight Saving Time, should it not be delivered by
the broadcaster.
Enter the date when UTC Usage is set to Off.
Enter the time when UTC Usage is set to {Off.
Select Once for a onetime event, select Daily for each day, same time event. A
free timer is default Off.
Select Channel to wake up the receiver to view the channel.
Select the channel for this event. Use t u or OK for a pull down list to select.
Select the date for the event.
Enter the time to start the event.
Enter the length of the event.
Set the age limit for a viewer if the viewer is underage. These only functions if a
broadcaster sends an age-signalling for the current programme. You can only
enter the Parental Lock menu by entering your password. The default password
0000
Select either On or Off. When On many menu items can only be accessed after
entering the password.
Set to Off, channels selected as Lock in the Edit Channel menu, are all accessible
without entering the password. When selected On, these channels are blocked
and need the password to be entered.
To change the default password from 0000 to another password like you wish,
select this option. Enter the new password.
Re-enter your new password to confirm.
Make a note off the new password.
OSD means On Screen Display, all the graphics you will see on screen.
Set the time (in seconds) the program banner will be shown on screen, when
switching channels.
26