Related Manuals for Strong SRT 6200
Summary of Contents for Strong SRT 6200
- Page 1 Digital Satellite Receiver SRT 6200/SRT 6202/SRT 6205 User Manual 1.00 SRT 6202/6205 SRT 6205...
-
Page 4: Table Of Contents
Table of ConTenTS 1.0 InTRoDUCTIon 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Accessories 1.5 Usage of external USB devices 2.0 YoUR ReCeIveR 2.1 Rear Panel 2.2 Remote Control Unit 2.3 Default PIN code: 0000 3.0 ConneCTIonS 3.1 Basic connection with SCART cable 3.2 Connecting to Satellite Dish 3.3 Connecting USB storage device 4.0 STaRTIng Up... -
Page 5: Introduction
1.0 InTRoDUCTIon 1.1 Safety Instructions Do noT InSTall YoUR ReCeIveR: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots. Do noT eXpoSe The ReCeIveR oR ITS aCCeSSoRIeS: To direct sunlight or near any other equipment that generates heat;... -
Page 6: Equipment Set-Up
1.3 equipment Set-up We recommend you consult a professional installer to set up your equipment. Otherwise, please follow the instructions below: Refer to the user manual of your TV and your antenna. Make sure that the SCART cable and outdoor components are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver. -
Page 7: Remote Control Unit
3. SaT oUT To connect an extra receiver to the satellite signal from dish 4. SaT In To connect to the LNB for satellite signal from dish 5. Tv SCaRT To connect to your TV set using a SCART cable. 6. -
Page 8: Default Pin Code: 0000
Freezes/resumes video or playback (Starts Timeshift in case setting adjusted accordingly and USB storage device is connected). Jump backwards during playback Jump forwards during playback " Record (Starts instant recording in case setting adjusted accordingly and USB storage device is connected). Play (Opens the recorded list in viewing mode in case USB storage device is connected). -
Page 9: Antenna Mode
b) Your dish is aimed at another satellite Select Other in Select satellite menu and press oK. A list of satellites will be listed. If you select one out of the satellite list, the Configure Antenna menu will appear. Use this menu to set the LNB Type, LNB Low Freq, LNB High Freq, Band control, Polarisation control, DiSEqC Switch and Antenna mode. -
Page 10: Installation
Sort (gReen button) You can sort channels by Name a~z, Name z~a, Free-CA, Fav–NO Fav or Frequency Low-High. Edit (YelloW button) Select the channel you want to edit and press YelloW (Edit) to enter the modification submenu. Here you can edit Program Name, Frequency, Symbol rate, Video PID and Audio PID. -
Page 11: System Setting
5.2.2 auto Scan Use gReen to set the scan mode to Free or Free+Scrambled. If mode is Free, only Free-to-Air channels will be added to the channel list. If mode is Free+Scrambled, all channels from the selected satellite will be added. Press YelloW to set the Blind Scan to ON or OFF. -
Page 12: Time Settings
5.3.1.3 Time Settings If a broadcaster provides GMT, you can set the time using GMT or set the time manually. If the GMT usage is ON, you need to set the Time Zone. If you set GMT Usage to OFF, Set Data and Set Time are displayed. -
Page 13: Timer
5.3.5 System Update Options are: OAD, Update by USB or Backup to USB. o ver air Download (oaD) n Select this option in order to update your receiver with the latest software version. Software update service is available from satellite ASTRA 19.2E. note: If needed, parameters can be changed. -
Page 14: Multimedia
5.5 Multimedia The receiver can play back recordings you have made, playback music & video files and show pictures from a connected USB device. You can play Gomoku or open the calendar. 5.5.1 My album The receiver is able to show pictures in JPEG, BMP and GIF formats. Use navigation buttons and help tips to select pictures and display them. -
Page 15: Watching Tv And Listening To The Radio
6.0 WaTChIng Tv anD lISTenIng To The RaDIo 6.1 program Information In TV mode (no menu operation), press Info. The program information banner will be displayed showing channel number, channel name, current, next program name (if available from broadcast) and current time. To view technical information about the current channel, press Info twice. -
Page 16: Trouble Shooting
noTe: Audio tracks containing “(AC3)” can only be listened to if the receiver is connected to a digital audio amplifier and this amplifier is switched ON and set to the correct input. 6.6 TeleTeXT function Press TeXT in normal viewing mode and pq to increase or decrease the displayed page number. Use numeric buttons to input a page directly. -
Page 17: Specifications
Cause Remedy No picture The receiver can’t receive the signal Check the antenna cable, replace the cable, or connect the cable to the receiver tightly. Incorrect values of some tuner Set the values of the tuner parameters. parameters correctly in the installation menu.