Table of Contents
Advertisement
P.3 Conventions & Terminology
The following conventions are used throughout this manual:
•
Numbered lists provide sequential steps
•
Bulleted lists provide information, not procedural steps
•
The terms 'Anybus', 'X-gateway' or 'module' refers to the Anybus X-gateway module
•
Hexadecimal values are written in the format NNNNh, where NNNN is the hexadecimal value
•
A byte always consists of 8 bits
•
The terms 'master', 'scanner', 'client' and 'controller' will be used interchangeably to describe a
controlling unit on the network
•
The terms 'slave', 'adapter', 'server' and 'device' will be used interchangeably to describe units
that are controlled by controlling units on the network
Anybus X-gateway for Modbus-TCP - Modbus-TCP
Doc.Rev. 1.00
About This Document P-6
Doc.Id. SCM-1200-114
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus X-gateway Modbus-TCP and is the answer not in the manual?