Table of Contents
Advertisement
7.3.1 Home
The introductory window of the configuration and status web pages presents important error tracking
information, as well as general information and statistics.
Operation Mode
The table below shows the correlation between the operation modes of Network 1 and Network 2.
Modbus-TCP
(Network 2)
In case of an error on Network 1, the following additional fieldbus statuses may appear:
Modbus-TCP (Network 1)
Shutdown
Anybus X-gateway for Modbus-TCP - Modbus-TCP
Doc.Rev. 1.00
I/O data exchanged
Run
Data is exchanged between the two net-
works
Idle
Network 2 exchanges no data. Data to the
Network 1 is in clear or freeze state
Description
Further Modbus-TCP requests will be ignored (the X-gateway needs a restart)
Modbus-TCP (Network 1)
No I/O data exchanged
Network 1 exchanges no data. Data to the
Network 2 is in clear or freeze state
No data is exchanged. Both networks, inde-
pendently, are in clear or freeze state
Network Configuration 29
Doc.Id. SCM-1200-114
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus X-gateway Modbus-TCP and is the answer not in the manual?