Front Panel Indicators; Figure 7-1 Front Panel - Honeywell HTRD400 Reference Manual

Operating Modes and Status Indicators

Front Panel Indicators

COMPUTER
Indicator
RECORD Solid green indicates the
HTRD400 Recorder is recording
(writing data to the hard drive).
Blinking green indicates the hard
drive is full (if recording mode is
set to Stop).
Rapid blinking green indicates
that a full erasure of the hard
drive is underway.
THERMAL
Rev 1.02
When the HTRD400 Recorder is first powered up, the POWER LED on the right-hand side
will blink on and off during the power up process and then turn to solid green.
Figure 7-1 shows the location of the status indicators on the front panel and
describes the function of the indicators.
Figure 7-1 Front Panel
POWER
Table 7-1 Front Panel Indicator Status
Green
Solid orange indicates the
current hard drive temperature is
outside recorder operating
temperature range. The unit
begins to record as soon as the
normal temperature range is
reached.
Function and status
Amber
84
Table 7-1
Status
indicators
HTRD400
Red
See page 47 for more
information.
Document 900.0328
05/05