Figure 2-10 Front Panel Connections; Table 2-2 Rear And Front Panel Connections - Honeywell HTRD400 Reference Manual

COMPUTER POWER
Table 2-2 Rear and Front Panel Connections
Label
Rear Panel
INTERFACE
COM PORT
CAMERAS ONLY
Front Panel
COMPUTER
POWER
Rev 1.02
Figure 2-10 Front Panel Connections
Connects to ...
Wiring harness on bus. The INTERFACE port contains:
• Eight programmable trigger inputs
• Power in for the HTRD400 System
• GPS power and GPS data signaling
See Appendix E for the pinouts for this Interface port.
RS232 serial port (DCE device) reserved for future use
1 to 4 HTCD Digital Cameras via CAT5 straight data/power cable connector from the
camera
PC or laptop
Push button that turns on (wakes up) the HTRD400 Recorder.
For a description of the front panel LEDs, see
HTRD400 System Reference Guide
HTRD400
Caution Connect using only a CAT5
Ethernet crossover cable
obtained from Honeywell.
Chapter 7.
21 Document 900.0328
05/05