Table of Contents
Advertisement
BusView Player Operation
Searching for Clips on a Connected HTRD400 Recorder
This combo button lets you
search for clips stored on the
recorder hard drive or
archived to a connected PC.
Add to search
Abort the edit
These buttons allow you
to modify, delete, or
delete all of the selected
text. The buttons are
active when you select
criteria within the
summary. See
Table 8-3
for a complete
description.
Rev 1.02
To search for clips on a connected HTRD400 Recorder:
1.
Click the Search icon
Search dialog box displays.
Figure 8-4
Start Search
2.
Select Recorders from the combo button on the Source tab, then click Add. The
Recorders button toggles between Archives and Recorders.
If you are connected to a recorder ...
3.
The recorder name automatically
populates in the source field.
4.
Enter your search criteria on each tab (Date & Time, Triggers, Cameras, Rules, GPS)
as desired.
For example, to search for a date range within clips:
a.
Select the Date & Time tab.
b.
Click the By Date & Time combo button and select the option that best suits your
search. Depending on your choice, the fields below change, allowing you to
narrow your search parameters.
on the lower right-hand corner of the BusView Player. The
If you are not connected to a
recorder ...
A Browse for Recorder message
displays. Select the recorder from the
recorders list. Click OK.
96
When you click Add,
your search criteria
populates here.
Save this search
criteria for future use.
Opens a file dialog box
where you can locate
previously defined
searches. This action
replaces the criteria
in the Summary area.
Document 900.0328
05/05
Advertisement
Table of Contents
