Modifying Record Rule Settings; Adding, Modifying, Or Removing User Accounts - Honeywell HTRD400 Reference Manual

Modifying Record Rule Settings

Adding, Modifying, or Removing User Accounts

Rev 1.02
You can also stop the HTRD400 Recorder from gathering GPS data by clearing the Record
GPS data when a rule is active check box.
You can modify record rule settings on the Rule Summary (see
• On the Task Overview tab, click Rules, or
• From the Configure menu, select Configure Rules ...
Note You must have administrator privilege to change user accounts or to disable
password protection when password protection is enabled.
To add, modify, or remove user accounts:
1. Select the Administration tab.
2. View the current user accounts by selecting the + box next to each user type to
expand the list.
3. Click Add to add a new user account, or
Select a user and then click Edit to change the parameters as desired, or
Select a user and then click Remove to delete the user account.
HTRD400 System Reference Guide
79
Figure 5-13):
Document 900.0328
05/05