Honeywell HTRD400 Reference Manual page 141

Rev 1.02
10. Review the configuration summary (see
When you are satisfied that your configuration settings meet your requirements, click
Next.
Now that you have completed your configuration settings, you should save the
settings (recommended) and then upload the Configuration file.
Caution Your selections are not activated until you upload the Configuration
file to the HTRD400 Recorder (see
an HTRD400 Recorder, page 67).
11. Save your changes.
12. Upload the configuration to the recorder.
13. Click Finish to exit the Setup Wizard.
Caution YWe recommend that you archive any clips you may need in the
future before putting the unit back on the bus.
HTRD400 System Reference Guide
Reviewing a Configuration
Uploading a Configuration File to
127
File, page 65).
Document 900.0328
05/05