Figure 5-19 Rule Configuration (Cameras); Figure 5-20 Camera Selection - Honeywell HTRD400 Reference Manual

Rev 1.02
Figure 5-19 Rule Configuration (Cameras)
The Total bandwidth used displays the maximum data storage rate.
The Estimated Recording Time displays the length of time it will take to fill the hard
disk based on the number of cameras used and the image quality settings.
When you modify the image quality, resolution, and FPS setting, the system
automatically updates the Estimated Recording Time and Total Bandwidth Used
fields.
13. Click Add on the Rule Configuration (Cameras) window. The Camera Selection dialog
box displays.
Figure 5-20 Camera Selection
14. Select the camera you want video and audio to record from in this rule and then click
the right arrow to move it to the Selected Cameras area. Repeat for each camera you
wish to add to the rule.
15. Click OK to return to Rule Configuration (Cameras).
16. If you want to change the camera settings (image quality, resolution, or frames per
second), select the camera name and then click Edit to open the Camera Edit dialog
box.
HTRD400 System Reference Guide
61 Document 900.0328
05/05