Table of Contents
Advertisement
Related Documents
Rev 1.02
•
Appendix B, Factory Set
that come with your HTRD400 Recorder.
•
Appendix C,
Networking, explains in detail closed-loop networking as it applies to
the HTRD400 network.
•
Appendix D,
Solutions, provides answers for common technical issues as well as
explaining common static and error message generated by the Toolbox and Player
applications. This appendix also describes the images that display on the Player
screen when the recorder experiences video loss from a camera or when you select
a clip to view.
•
Appendix E, Specifications and Connector
for the HTRD400 Recorder. It also shows schematics for the interface connector and
CAT5 data/power and CAT5 Ethernet crossover cables. The 25-pin interface
connector pinouts are included.
•
The
Glossary
is a quick reference for acronyms and terms used throughout the
document.
For more information on the HTRD400 System, refer to the following documents:
Document title
HTRD400 System Quick Setup
HTCD50 Digital Camera User Guide
HTCD52 Digital Camera Install Guide
HTRD System Networking Application
Note
HTGPS Module Installation Application
Note
The content of these documents as they apply to the HTRD400 system is contained within
this Guide. They are also available separately from Honeywell.
x
Configurations, describes the four configuration scenarios
Pinouts, lists the technical specifications
Part number
900.0327
900.0329
900.0332
900.0330
900.0324
900.0328
05/05
Advertisement
Table of Contents
