Table of Contents
Advertisement
This message ...
Rev 1.02
HTRD400 System Reference Guide
Means ...
Displays when the supplied user name or
password is incorrect. Enter a valid user
name and password. For more
information, see
page 68.
Indicates an invalid network path. Try
rebooting your PC. The IP address for the
PC or the HTRD400 Recorder must both
use APIPA or DHCP IP addresses. For
more information, see
Networking.
The HTRD400 Recorder only supports a
single active connection. Disconnect
from the recorder before attempting to
connect from the other application.
This message can also display when a
full erase is in progress.
Displays when the hard drive is not within
the temperature range. Check the
temperature LED on the recorder. For
more information, see
Operating Modes and Status
Indicates incompatibility between the
HTRD400 Recorder firmware and Player
software. For more information, see
Loading Configuration
141
Controlling User
Access,
Appendix C,
Chapter 7,
Indicators.
Files, page 44.
Document 900.0328
05/05
Advertisement
Table of Contents
