Operating Modes And Status Indicators; Operating Modes - Honeywell HTRD400 Reference Manual

Operating Modes and Status Indicators

Operating Modes

Operating Description
mode
Sleep When the recorder is first powered up it enters Sleep mode. The recorder stays in Sleep mode
until a wakeup trigger has occurred. The recorder returns to Sleep mode when none of the other
modes are active or if the recorder goes outside operational voltage.
Standby Indicates that the recorder is powered, is within the operating temperature range, and is waiting
for record rule conditions to be met before beginning to record.
Record Indicates the recorder is acquiring data and saving data to the hard drive based on the recording
rules defined in the Configuration setup (see
video and audio from cameras, trigger status, and status logs.
The recorder must be within recording temperature range to accept data. If the recorder is outside
recording temperature range, it shuts down and enters Standby mode. If the recorder is outside
operational temperature range, it enters Sleep mode.
The recorder returns to Standby mode when recording mode terminates.
Rev 1.02
This chapter describes the HTRD400 Recorder:
• Operating modes
• Front panel indicators—location and status
The HTRD400 Recorder has three operating modes when power is first applied:
Chapter 5, System Configuration). Data consists of
83
7
Document 900.0328
05/05