Table of Contents
Advertisement
System Configuration
Table 5-11
Camera Edit Fields
Field
Name
Quality
Resolution
Frame Rate
Enable audio
Mute
Snap
Rev 1.02
Figure 5-21
Camera Edit
17. Follow
Table 5-11
to modify the camera settings.
Description
Displays the camera name. This is a non-editable field.
Select the image quality. Options are:
Extended, Good, Better, Best
Set the image resolution. Options are:
QVGA. Standard resolution
VGA. Highest resolution
Set the Frame Rate (Frames Per Second) recorded from each camera. The FPS
rate depends on the image resolution setting. Options are:
QVGA. 30 FPS maximum
VGA. 15 FPS maximum from each camera
Note
You must configure at least one camera with a minimum 1 FPS for a rule
to be valid (so the system will record).
See also the Note below this table.
Check for audio to record with video from this camera. This field is grayed out
when:
•
This feature is not supported.
•
Audio was disabled on the Camera Summary screen.
Note
The system will not record audio only; that is, without video.
Turns the audio off. This button toggles between Mute and Unmute.
Save a copy of the image.
18. Repeat
step 16
and
step 17
19. When you are finished modifying the camera settings, click OK to return to the Rule
Configuration (Cameras). Your new settings display.
for each camera.
62
Document 900.0328
05/05
Advertisement
Table of Contents
