Cisco ASR 9000 Series Configuration Manual page 93

Establishing Subscriber Sessions
SUMMARY STEPS
1. configure
2. l2tp-class class_name
3. authentication [ disable | enable ]
4. congestion control
5. digest [check disable |hash { MD5 | SHA1 } | secret { 0 | 7 | LINE } ]
6. hello-interval interval_duration
7. hostname host_name
8. receive-window size
9. retransmit initial [retries | retries_number | timeout {max max_seconds | min min_seconds }
10. timeout [no-user{ timeout_value | never } | setup setup_value ]
11. tunnel accounting accounting_method_list_name
12. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 l2tp-class class_name
Example:
RP/0/RSP0/CPU0:router(config)# l2tp-class class1
Step 3 authentication [ disable | enable ]
Example:
RP/0/RSP0/CPU0:router(config-l2tp-class)# authentication
disable
Step 4
congestion control
Example:
RP/0/RSP0/CPU0:router(config-l2tp-class)# congestion
control
Step 5
digest [check disable |hash { MD5 | SHA1 } | secret { 0 | 7 | LINE
} ]
Example:
RP/0/RSP0/CPU0:router(config-l2tp-class)# digest check
disable
OL-26148-02
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Provisioning PPP LAC Session
Purpose
Enters global configuration mode.
Configures the L2TP class command.
Enables the tunnel authentication. The Enable and
Disable options enables or disables the L2TP tunnel
authentication.
Enables L2TP congestion control.
Messages the Digest configuration for L2TPv3
control connection.
4.2.x
83