Configuring Authentication, Authorization, and Accounting Functions
Command or Action
Step 4
Use the commit or end command.
Configuring AAA Attribute Format Function: An example
configure
aaa attribute format red
username-strip prefix-delimiter @
!
!
end
Making RADIUS Server Settings
In order to make BNG interact with the RADIUS server, certain server specific settings must be made on the
BNG router. This table lists some of the key settings:
Settings
Server host
Attribute list
Server key
Dead criteria
Retransmit value
Timeout value
Automated
testing
IP DSCP
For more making RADIUS server settings, see
OL-26148-02
Description
Defines the RADIUS server details to which BNG will connect.
Defines which attribute list is to be used.
Defines the encryption status.
Defines the criteria that is used to mark a RADIUS server as dead.
Defines the number of retries the BNG makes to send data to RADIUS server.
Defines how long BNG waits for the RADIUS server to reply.
Defines the duration after which automated testing will start and the username to be
tested.
Allows RADIUS packets to be marked with a specific Differentiated Services Code Point
(DSCP) value.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Purpose
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Configuring RADIUS Server Settings, on page
Making RADIUS Server Settings
26.
4.2.x
25