Cisco ASR 9000 Series Configuration Manual page 205

RADIUS Attributes
Cause Code
53
54
60
61
62
63
64
65
66
67
100
101
102
120
150
151
152
160
170
180
185
190
195
OL-26148-02
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Value
Bad-Hostname
Bad-Port
Reset-TCP
TCP-Connection-Refused
Timeout-TCP
Foreign-Host-Close-TCP
TCP-Network-Unreachable
TCP-Host-Unreachable
TCP-Network-Admin
Unreachable
TCP-Port-Unreachable
Session-Timeout
Session-Failed-Security
Session-End-Callback
Invalid-Protocol
RADIUS-Disconnect
Local-Admin-Disconnect
SNMP-Disconnect
V110-Retries
PPP-Authentication-Timeout
Local-Hangup
Remote-Hangup
T1-Quiesced
Call-Duration
RADIUS Disconnect-Cause Attributes
Description
Hostname cannot be validated.
Port number is invalid or missing.
TCP connection has been reset.
Codes 60 through 67
Note
apply to Telnet or raw
TCP sessions.
TCP connection has been refused
by the host.
TCP connection has timed out.
TCP connection has been closed.
TCP network is unreachable.
TCP host is unreachable.
TCP network is unreachable for
administrative reasons.
TCP port in unreachable.
Session timed out.
Session failed for security reasons.
Session terminated due to callback.
Call refused because the detected
protocol is disabled.
Disconnected by RADIUS request.
Administrative disconnect.
Disconnected by SNMP request.
Allowed V.110 retries have been
exceeded.
PPP authentication timed out.
Disconnected by local hangup.
Disconnected by remote end
hangup.
Disconnected because T1 line was
quiesced.
Disconnected because the
maximum duration of the call was
exceeded.
4.2.x
195