Cisco ASR 9000 Series Configuration Manual page 147

Configuring Subscriber Features
Command or Action
Step 7 Use the commit or end command.
Step 8 show snmp users
Example:
RP/0//CPU0:router# show snmp users
Step 9
show snmp group
Example:
RP/0//CPU0:router# show snmp group
Step 10 show snmp view
Example:
RP/0//CPU0:router# show snmp view
Enabling the Mediation Device to Intercept VoIP and Data Sessions: An example
configure
snmp-server view TapName ciscoTap2MIB included
snmp-server view TapName ciscoUserConnectionTapMIB included
snmp-server group TapGroup v3 auth read TapView write TapView notify TapView
snmp-server host 223.255.254.224 traps version 3 auth bgreen udp-port 2555
snmp-server mduser-id TapGroup v3 auth md5 mdpassword
end
!
!
OL-26148-02
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Purpose
The Lawful Intercept security level must also match that of the
MD.
• Choices other than MD5 are available on the router, but the MD
values must match.
Most MDs default to or support only MD5.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without committing
the configuration changes.
Displays information about each SNMP username in the SNMP user
table.
Displays information about each SNMP group on the network.
Displays information about the configured views, including the
associated MIB view family name, storage type, and status.
Per-session Lawful Intercept
4.2.x
137