Configuring Radius Server Settings; Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide - Cisco ASR 9000 Series Configuration Manual

Configuring RADIUS Server Settings

For more making specific automated testing settings, see
For more making specific IP DSCP settings, see
Restriction
The service profile push or asynchronously pushing a profile to the system is not supported. To download a
profile from Radius, the profile must be requested initially as part of the subscriber request. Only service-update
is supported and can be used to change a service that was previously downloaded.
Configuring RADIUS Server Settings
Perform this task to make RADIUS server specific settings on the BNG router.
SUMMARY STEPS
1. configure
2. radius-server host host_name acct-port accounting_port_number auth-port authentication_port_number
3. radius-server attribute list list_name attribute_list
4. radius-server key 7 encrypted_text
5. radius-server disallow null-username
6. radius-server dead-criteria time value
7. radius-server dead-criteria tries value
8. radius-server deadtime limit
9. radius-server ipv4 dscp codepoint_value
10. radius-server load-balance method least-outstanding ignore-preferred-server batch-size size
11. radius-server retransmit retransmit_value
12. radius-server source-port extended
13. radius-server timeout value
14. radius-server vsa attribute ignore unknown
15. radius source-interface Loopback value vrf vrf_name
16. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
radius-server host host_name acct-port accounting_port_number
auth-port authentication_port_number

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,

Release 4.2.x
26
Configuring Authentication, Authorization, and Accounting Functions
Configuring Automated Testing, on page
Setting IP DSCP for RADIUS Server, on page
Purpose
Enters global configuration mode.
Specifies the radius server and its host name.
Configures the UDP port for RADIUS accounting
and authentication requests. The accounting and
30.
31.
OL-26148-02