Additional References - Cisco ASR 9000 Series Configuration Manual

Additional References

Router Config:
policy-map type control subscriber PL2
event session-start match-first
class type control subscriber class-default do-all
1 activate dynamic-template service1 aaa list default
In the above example, the "aaa list default" keyword specifies that the template "service1" be downloaded
from the AAA server. A template is downloaded only once. If there are multiple control policies referring to
service1, then those will get the previously downloaded version.
It is possible to activate more than one dynamic template on the same subscriber interface, for the same event
or different events. If the configurations for a particular functionality is defined in multiple dynamic templates,
the configurations are derived from all the templates on a certain order of precedence. This order is based on
the type of dynamic template, and whether it is being applied from CLI or AAA. The order is:
• Template applied by the user profile from AAA
• Template applied by the service profile from AAA
• IP Subscriber template applied from CLI
• PPP template applied from CLI
• Service template applied from CLI
The tasks involving the use of dynamic templates to define specific feature configurations are included in
their corresponding feature topics.
Additional References
These sections provide references related to implementing control policy.
MIBs
MIB
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.2.x
52
MIBs Link
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
Activating Control Policy
OL-26148-02