Cisco ASR 9000 Series Configuration Manual page 176

Configuring Web Logon
Command or Action
Step 13
sequence_number authenticate aaa list default
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# 10
authenticate aaa list default
Step 14 sequence_number deactivate dynamic-template dt_name
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# 10 deactivate
dynamic-template HTTP_REDIRECT
Step 15 sequence_number stop-timer timer_name
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# 20 stop-timer
AUTH_TIMER
Step 16 event time-expiry match-all
Example:
RP/0/RSP0/CPU0:router(config-pmap)# event
session-start match-all
Step 17 class type control subscriber class_name do-all
Example:
RP/0/RSP0/CPU0:router(config-pmap-e)# class type
control subscriber IP_UNAUTH_COND do-all
Step 18
sequence_number disconnect
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# 10 disconnect
Step 19 Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.2.x
166
Configuring Subscriber Features
Purpose
Specifies and authenticates the default AAA method
list.
Disables the timer before it expires.
Disables the timer before it expires.
Configures the timer expiry policy event that runs all
the matched classes.
Configures the class to which the subscriber has to be
matched. When there is a match, execute all actions.
Disconnects the session.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
OL-26148-02