Cisco ASR 9000 Series Configuration Manual page 204

RADIUS Disconnect-Cause Attributes
Cause Code
25
26
27
28
29
30
31
32
33
40
41
42
43
44
45
46
47
48
49
50
51
52
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.2.x
194
Value
Password-Fail
Raw-TCP-Disabled
Control-C-Detected
EXEC-Process-Destroyed
Close-Virtual-Connection
End-Virtual-Connection
Exit-Rlogin
Invalid-Rlogin-Option
Insufficient-Resources
Timeout-PPP-LCP
Failed-PPP-LCP-Negotiation
Failed-PPP-PAP-Auth-Fail
Failed-PPP-CHAP-Auth
Failed-PPP-Remote-Auth
PPP-Remote-Terminate
PPP-Closed-Event
NCP-Closed-PPP
MP-Error-PPP
PPP-Maximum-Channels
Tables-Full
Resources-Full
Invalid-IP-Address
RADIUS Attributes
Description
Bad passwords.
Raw TCP disabled.
Control-C detected.
EXEC process destroyed.
User closes a virtual connection.
Virtual connected has ended.
User exists Rlogin.
Invalid Rlogin option selected.
Insufficient resources.
PPP LCP negotiation timed out.
Codes 40 through 49
Note
apply to PPP sessions.
PPP LCP negotiation failed.
PPP PAP authentication failed.
PPP CHAP authentication failed.
PPP remote authentication failed.
PPP received a Terminate Request
from remote end.
Upper layer requested that the
session be closed.
PPP session closed because there
were no NCPs open.
PPP session closed because of an
MP error.
PPP session closed because
maximum channels were reached.
Disconnect due to full terminal
server tables.
Disconnect due to full internal
resources.
IP address is not valid for Telnet
host.
OL-26148-02