Configuring Radius Attribute Format; Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide - Cisco ASR 9000 Series Configuration Manual

Configuring Authentication, Authorization, and Accounting Functions

Configuring RADIUS Attribute Format

Perform this task to the define RADIUS attribute format for the nas-port attribute, and apply a predefined
format on nas-port-ID attribute.
SUMMARY STEPS
1. configure
2. aaa radius attribute
3. nas-port format e string type nas-port-type value
4. nas-port-id format format name
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 aaa radius attribute
Example:
RP/0/RSP0/CPU0:router(config)# aaa radius
attribute
Step 3 nas-port format e string type nas-port-type value
Example:
RP/0/RSP0/CPU0:router(config)# nas-port
format e format1 type 30
Step 4 nas-port-id format format name
Example:
RP/0/RSP0/CPU0:router(config)# nas-port-id
format format2
Step 5 Use the commit or end command.
OL-26148-02
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Purpose
Enters global configuration mode.
Configures the AAA radius attribute.
Configures the format for nas-port attribute. The string represents
a 32 character string representing the format to be used. The
nas-port-value ranges from 0 to 44.
Applies a predefined format to the nas-port-ID attribute.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
Configuring RADIUS Attribute Format
4.2.x
23