Hardware Requirements For Bng; Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide - Cisco ASR 9000 Series Configuration Manual

Hardware Requirements for BNG

• Deploying QoS—Quality of Service (QoS) is deployed to provide control over a variety of network
• Configuring Subscriber Features—Configurations are done to activate certain subscriber features that
• Verifying Session Establishment—Established sessions are verified and monitored to ensure that
To use a BNG command, you must be in a user group associated with a task group that includes the proper
task IDs. The Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command
Reference guide includes the task IDs required for each command. If you suspect that the user group assignment
is preventing you from using a command, contact your AAA administrator for assistance.
Restriction
The Select VRF Download (SVD) must be disabled, when BNG is configured. For more information about
SVD, see the Cisco IOS XR Routing Configuration Guide for the Cisco XR 12000 Series Router.
Hardware Requirements for BNG
These hardwares support BNG:
• BNG is supported on Satellite Network Virtualization (nV) system.
• BNG is supported on Cisco ASR 9000 Series Aggregation Services Routers only with RSP-440 route

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,

Release 4.2.x
6
applications and traffic types. For example, the service provider can have control over resources (example
bandwidth) allocated to each subscriber, provide customized services, and give priority to traffic belonging
to mission-critical applications. For details, see
provide additional capabilities like policy based routing, access control using access list and access
groups, and multicast services. For details, see
connections are always available for use. The verification is primarily done using "show" commands.
Refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command
Reference guide for the list of various "show" commands.
switch processors. The RSP 2 route switch processor does not support BNG.
Table 1: Line Cards and Modular Port Adapters Supported on BNG
Line Cards
24-Port 10-Gigabit Ethernet Line Card, Service
Edge Optimized
36-Port 10-Gigabit Ethernet Line Card, Service
Edge Optimized
80 Gigabyte Modular Line Card, Service Edge
Optimized
160 Gigabyte Modular Line Card, Service Edge
Optimized
20-Port Gigabit Ethernet Modular Port Adapter
(MPA)
Broadband Network Gateway Overview
Deploying the Quality of Service (QoS), on page
Configuring Subscriber Features, on page
Modular Port Adapters
A9K-24X10GE-SE
A9K-36X10GE-SE
A9K-MOD80-SE
A9K-MOD160-SE
A9K-MPA-20GE
103.
129.
OL-26148-02