Cisco ASR 9000 Series Configuration Manual page 103

Establishing Subscriber Sessions
SUMMARY STEPS
1. configure
2. dhcp ipv4
3. profile profile-name proxy
4. lease proxy client-lease-time value
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 dhcp ipv4
Example:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
Step 3 profile profile-name proxy
Example:
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile
profile1 proxy
Step 4 lease proxy client-lease-time value
Example:
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile)#
lease proxy client-lease-time 600
Step 5
Use the commit or end command.
OL-26148-02
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Purpose
Enters global configuration mode.
Enters the IPv4 DHCP configuration mode.
Creates a DHCP profile.
Configures a client lease time for each profile. The
minimum value of the lease proxy client time is 300
seconds.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
Enabling DHCP Proxy
4.2.x
93