Europak-15A I/O Strobe Port Cable - Novatel EuroPak-15a User Manual

Appendix A
A.1.2.4 I/O Strobe Port Cable (NovAtel part number 60723065)
The strobe lines on the EuroPak-15a can be accessed by inserting the male DB9 connector of the I/O strobe
port cable into the I/O port. The other end of this cable is provided without a connector to provide flexibility.
The jacket insulation is cut away slightly from the end but the insulation on each wire is intact. The cable is
approximately 2 m in length. See Figure 19.
Wiring Table:
I/O Port
Pin
1
2
3
4
5
Reference Description
10 DB9P (male) connector
118
1 5
6 9
1
2
3
4
5
6
7
8
9
I/O Port I/O Port Cable
Signal Wire Color
VARF Black
PPS Brown
Reserved Red
Event1 Orange
PV Yellow
Figure 19: EuroPak-15a I/O Strobe Port Cable
I/O Port
Pin
6
7 Reserved
8 GND
9 GND
Reference Description
11 9-conductor cable
EuroPak-15a Receiver User Manual Rev 5
Technical Specifications
I/O Port I/O Port Cable
Signal Wire Color
Reserved Green
Blue
Violet
White/Grey