5.3.17 Unassign Unassign A Previously Assigned Channel - Novatel EuroPak-15a User Manual

Commands

5.3.17 UNASSIGN Unassign a Previously Assigned Channel

This command cancels a previously issued ASSIGN command and the SV channel reverts to automatic control.
Syntax:
UNASSIGN CHANNEL
Field
Field
Name
1 header
2 channel
Reserved field required for Binary format only. Set to 2 when entering the
3
command in Binary.
Example:
UNASSIGN 11
EuroPak-15a Receiver User Manual Rev 5
Valid Values
This field contains the Abbreviated ASCII command name. See Section 4.1
on Page 31.
0 to 15
Description
Previously selected SV channel
to apply automatic search and
acquisition mode, see also
Table 56 on Page 120.
Chapter 5
Message ID: 29
Binary Binary
Format
Bytes Offset
H 0
ULong 4 H
Enum 4 H+4
67