Compactflashtm Master/Slave Jumper Setting; (Jp2) - Advantech UNO-2050 User Manual

A.8 CompactFlash
Setting (JP2)
The CompactFlash interface uses a primary IDE channel, which could
be set as the master or slave device by changing the setting of JP2.
Master Device: (Default)
Slave Device:
UNO-2050 has one internal CompactFlash card slot and one external
CompactFlash card slot. Internal CompactFlash card slot supports
CompactFlash type I (3mm thick) only and External CompactFlash card
slot supports both Type I and type II (5mm thick) cards
A 32 MB CompactFlash card is equipped in the UNO-2050CE with
Windows CE .NET OS. For UNO-2050, there is no CompactFlash card
on the slot. UNO-2050 also supports IBM Microdrive storage device,
which is an ultra-miniature hard disk from IBM that was introduced in
1998. The Microdrive is built into a Type II CompactFlash form factor.
Note:
TM
JP 2
JP 2
Currently, Windows CE .NET v4.0/4.1 can't detect
slave device. Please kindly avoid using slave device
under the Windows CE OS.
Master/Slave Jumper
Appendix A Pin Assignments 4 1