Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. C&T is a trademark of Chips and Technologies, Inc. All other product names or trademarks are properties of their respective owners. Part No. 2003205320 1st Edition Printed in Taiwan August 2006 UNO-2053E User Manual...
Page 3
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal- lation.
Page 4
Packing List Before setting up the system, check that the items listed below are included. If any item is not, please contact your dealer immediately. The UNO-2053E comes with the following items: • Warranty certificate • Software Supporting CD-ROM • 6P-6P-6P 20cm KB and PS/2 Mouse Y cable (P/N: 1652002202) •...
Page 7
UNO-2053E Overview This chapter gives background informa- tion on the UNO-2053E. It shows you the UNO-2053E overview and specifications. Sections include: • Introduction • Hardware Specifications • Safety Precautions • UNO-2053E Series • Chassis Dimensions...
Chapter 1 UNO-2053E Overview 1.1 Introduction Are you looking forward to a suitable embedded Application Ready Plat- form (ARP) that could shorten your development time and offer rich net- working interfaces to fulfill your extensive needs in different kind of...
Page 9
• Serial Port: Two standard RS-232 ports IRQ: All ports use the same IRQ assigned by BIOS Data bits: 5, 6, 7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd Speed: 50~115.2 kbps Data signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Max data distance: 50 feet (15.2 meters) •...
Caution!! Always ground yourself to remove any static electric charge before touching UNO-2053E. Modern elec- tronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic components on a static-dissipative surface or in a static-shielded bag..
1.4 UNO-2053E Series There are two products in UNO-2053E series listed as below: • UNO-2053E: UNO-2053E hardware platform • UNO-2053ECE: UNO-2053E hardware platform with WinCE OS (built in 128MB CompactFlash card) • UNO-2053EXP: UNO-2053E hardware platform with WinXPe OS (built in 1GB CompactFlash card) 1.4.1 Packing List...
1.5 Chassis Dimensions Figure 1.1: Chassis Dimensions UNO-2053E User Manual...
Page 13
Hardware Functionality This chapter shows how to set up the UNO-2053E’s hardware functions, includ- ing connecting peripherals, switches and indicators. Sections include: •UNO-2053E Peripherals •COM1~COM2: RS-232 Interfaces •LAN: Ethernet Connector •Power Connector •LED Indicators •PS/2 Keyboard and Mouse Connector •Universal Serial Bus Connectors •PCMCIA: PC Card Slot...
Chapter 2 Hardware Functionality 2.1 UNO-2053E Peripherals The following two figures show the connectors on UNO-2053E. The fol- lowing sections give you detail information about function of each peripheral. Figure 2.1: UNO-2053E Front Panel Figure 2.2: UNO-2053E Rear Panel 2.2 COM1~COM2: RS-232 Interfaces The UNO-2053E offers two standard RS-232 serial communication inter- face ports on COM1 and COM2.
Please refer to A.4 for its pin assignments. 2.5 LED Indicators There are two LEDs on the UNO-2053E front panel for indicating system status: PWR LED is for power status and IDE LED is for IDE bus status.
2.9 VGA: VGA Display Connector The UNO-2053E provides a VGA controller for a high resolution VGA interface. It supports VGA and VESA, up to 1280 x 1024 @ 256 color and 1024 x 768 @ 24bpp resolution and up to 16 MB share memory. The VGA interface is reserved for system testing and debugging.
Page 17
Initial Setup This chapter shows how to initial the UNO-2053E, sections include: Sections include: • Insert CompactFlash Card • Chassis grounding • Connect the Power • BIOS Setup and System Assignments...
Figure 3.1: Chassis Grounding Connection 3.3 Power Connection Connect the UNO-2053E to a 10 ~ 30 VDC power source. The power source can either be from a power adapter or an in-house power source. 3.4 BIOS Setup and System Assignments UNO-2053E uses the Advantech SOM-2354 CPU module.
Pin Assignments This appendix shows the UNO-2053E pin assignments •Board Connectors and Jumpers •RS-232 Serial Port •Ethernet RJ-45 Connector •Phoenix Power Connector •PS/2 Keyboard and Mouse Connector •USB Connector •VGA Display Connector •CompactFlash Master/Slave Jumper Setting •Enhanced IDE connector...
Appendix A Pin Assignments A.1 Board Connectors and Jumpers There are connectors and jumpers on the UNO-2053E board. The follow- ing sections tell you how to configure the UNO-2053E hardware setting. Figure A-1 and figure A-2 show the locations of UNO-2053E connectors and jumpers.
Table A.1: UNO-2053E Connectors & Jumpers Internal IDE connector Phoenix power connector Internal CompactFlash card slot PC Card slot COM1 COM1 standard RS-232 serial port COM2 COM2 standard RS-232 serial port CON1 USB1 Connector CON2 USB2 Connector IDE LED Power LED...
A.4 Phoenix Power Connector (C) Table A.4: Phoenix Power Connector Pin Assigns Signal Name +10~30 VDC A.5 PS/2 Keyboard and Mouse Connector (KM1) PS/2 KB/MS Connector Pin Assignments Table A.5: Table A.6: Keyboard & Mouse Connector Pin Assigns Signal Name KB DATA MS DATA KB CLOCK...
H-SYNC V-SYNC Chipset The UNO-2053E uses a AMD CS5535 chipset for its SVGA controller. It supports interlaced and non-interlaced analog monitors (color and mono- chrome VGA) in high-resolution modes while maintaining complete IBM VGA compatibility. Digital monitors (i.e. MDA, CGA and EGA) are NOT supported.
Windows CE .NET OS. A 1GB CompactFlash card is equipped in the UNO-2053EXP with Windows XP embedded OS. For UNO-2053E, there is no CompactFlash card on the slot. UNO-2053E also supports IBM Microdrive storage device, which is an ultra-miniature hard disk from IBM that was introduced in 1998.
DATA 15 (*2) SIGNAL GND DMA REQUEST IO WRITE (*2) IO READ (*2) IO CHANNEL GND (*1) READY HDACK ADDR 1 ADDR 0 ADDR 2 HARD DISK HARD DISK SELECT 0 (*2) SELECT 1 (*2) IDE ACTIVE UNO-2053E User Manual...