A.8 Compactflash Master/Slave Jumper Setting (Jp2) - Advantech UNO-2053E User Manual

A.8 CompactFlash Master/Slave Jumper Setting (JP2)

The CompactFlash interface uses a primary IDE channel, which can be
set as the master or slave device by changing the setting of JP2.
Master Device: (Default)
Slave Device
UNO-2053E has one internal CompactFlash card slot which supports
CompactFlash type I (3mm thick) and type II (5 mm thick) cards.
Note:
A 128 MB CompactFlash card is equipped in the UNO-2053ECE with
Windows CE .NET OS. A 1GB CompactFlash card is equipped in the
UNO-2053EXP with Windows XP embedded OS. For UNO-2053E,
there is no CompactFlash card on the slot. UNO-2053E also supports
IBM Microdrive storage device, which is an ultra-miniature hard disk
from IBM that was introduced in 1998. The Microdrive is built into a
Type II CompactFlash form factor.
JP2
JP2
If you build up WinCE OS in CompactFlash card
by yourself, we strongly recommend that JP2
should set up to close status (Master)
19