1.3 Safety Precautions
The following sections tell how to make each connection. In most
cases, you will simply need to connect a standard cable. All of the
connector pin assignments are shown in Appendix A.
Warning! Always disconnect the power cord from your chassis
Caution!
6
UNO-2050 User's Manual
whenever you are working on it. Do not connect while
the power is on. A sudden rush of power can damage
sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Always ground yourself to remove any static electric
charge before touching UNO-2050. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface
or in a static-shielded bag..