Step 4: Power On Adam-4500; Jumper Setting - Advantech ADAM-4500 User Manual

Figure 2-4: Select Communication Port

Step 4: Power on ADAM-4500

Highlight the "Terminal" option, then press <enter>. Power on the ADAM-4500. After 5 seconds, the
screen shown in figure 2.5 will appear. The ADAM-4500 system is successfully started up.
Figure 2-5: Emulating Screen of ADAM-4500

2.3 Jumper Setting

We designed the ADAM-4500 with ease-of-use in mind. It has three jumper settings. The following
sections explain how to configure the module. You may want to refer to the figure below for help in
identifying card components.