Remote Power/Reset Setting; At/Atx Setting (Cn10); Bios Setting - Advantech UNO-348 Manual

3.5

Remote Power/Reset Setting

UNO-348 supports remote power/ reset function, and it can be adjusted via PSON1
on the I/O board. The default setting is for remote power function.
PSON1
(1-2) (Default)
(2-3)
UNO-348 supports remote power/ reset function, and it can be adjusted via CN11 on
the I/O board. The default setting is for remote power function.(for UNO-348-
ANN3AW)
CN11
(1-2) (Default)
(2-3)
3.6

AT/ATX Setting (CN10)

There's a CN10 on motherboard can be used for AT/ATX setting. The default setting
is AT mode. See the following table for switch configuration.
3.7

BIOS Setting

With the BIOS Setup program, you can modify BIOS settings and control the special
features of your computer. The Setup program uses a number of menus for making
changes and turning special features on or off.
Press the "ESC" key upon the first boot up to enter the BIOS setup screen, after then,
press the "Del" key during the Power On Self Test (POST) process to enter the BIOS
setup screen, otherwise the system will continue the POST process.
(Please refer to User Manual- Appendix A.11/ A.12 for more settings
UNO-348 User Manual
Description
Remote power function
Remote reset function
Description
Remote power function
Remote reset function
(1-2) AT Mode
(2-3) ATX mode
42
Instruction
Instruction
(1-2)
(2-3)