Jumper Setting - Advantech ADAM-5630 Series User Manual

3.2

Jumper Setting

3.2.1 Jumper Setting
The ADAM-5630 series has two types of jumper for user operation, as the below
shown.
Figure 3.2 The location of Jumper on the power board
Table 3.6: Jumper Setting for COM1
Location
CN2
Description
RS-232 mode for COM1
RS-485 mode for COM1
COM1 120 ohm TR in RS-485 mode
COM1 300 ohm TR in RS-485 mode
5 ADAM-5630_Series User Manual